Wire Cutting
EDM

VQ100F

VQ Series

VQ100F

Product Description
A Practical Wire EDM to Create Your Future
Product Introduction

Specification

VQ100F (Submerged Type)
Maximum workpiece
W1500 x D1000 x H305 mm
Max. Work piece Weight
1600kg
Travel of X/Y axes
1000 x 600 mm
Travel of U/V axes
120 x 120 mm
Travel of Z axis
310mm
Wire diameter
ø 0.15~0.3 mm
Number of axes controlled
5 Axis AC servo motor
Max taper angle
±26°/ 100mm
Machine size
W3600 x D2900 x H2300 mm
Machine Weight
5200 kg
Dielectric Tank Specifications
Tank Capacity (L)
300 L
Paper Filter (PCS)
2 pcs
Deionizer
Auto
Chiller unit
Auto (optional)
* The content of this catalogue is subject to be changed by the factory.

Accessory

Standard Accessories
  • Ion exchange resin
  • Paper filter x 2 pcs
  • Diamond guide x 2 pcs
  • Upper and lower flushing nozzle x 2 pcs
  • Energizing plates x 2 pcs
  • Brass Wire x 1 spool
  • Clamping tool 1 set
Options
  • Auto Wire Threading
  • XY axis linear scale
  • Clamping Beam
  • AVR 15KVA
  • Chiller Unit

Technology

Mechanical Structure
Mechanical Structure
Control
Auto Wire Threading
Cutting Technology
Mechanical Structure
  1. To ensure thermal balance, rib location is designed by Finite Element Analysis (FEA) assuring an optimized rigid structure.
  2. Rigid U and V truss design.
  3. High response AC servo motor for provide accuracy.
  4. Stainless steel worktable hardened with HRC50.
  5. Water-cooled lower arm prevents thermal expansion caused by heat build-up, maintaining accuracy.

Laser calibration - for the calibration and compensation of pitch errors or displacement errors of the machine structure.

Micron level precision is achieved through the selection of class leading machine motion elements. The cryogenically treated C1 grade ball screws are driven by high resolution AC servomotors, and are supported by widely spaced linear guide ways for maximum stability.

Graphical Interface

The HMI panel is easy to operate, using class leading ergonomic technology

Intelligent Machining mode

Watchdog during machining

Well considered in NC settings

Database cutting technologies

Icons assistant to user

Parameters & Maintenance information

Remote Control (Standard Accessory)

Auto Wire Threading
wire-cutting-np400l

200mm Submerge threading

wire-cutting-np400l

200mm Submerge threading

wire-cutting-np400l

400mm thickness threading in break point

wire-cutting-np400l
High Speed Auto Wire Threading System
Workpiece thickness 100mm
  • Wire annealing and cutting : 10 sec
  • Threading : 10 sec
Reliable Auto Wire Threading system

The EXCETEK AWT is very sophisticated design that provides continuous unmanned operation day and night. Unlike other systems it can thread at the point of the wire breakage.

A water jet function enables the machine to thread workpieces up to 500mm.

wire-cutting-np400l
wire-cutting-np400l
The corner control

Corner control machining parameter controls the machining speed and inhibiting the wire twisting phenomenon, hence reduce cornered 'washout', ensuring machining accuracy and molding compatibility, hence effectivelyimprove molding machining quality and speed.

Operator can adjust quality priority or speed priority according to wire diameter or thickness selector.

Corner angle 30° / Zoom-in x 100

Corner angle 60° / Zoom-in x 100

Corner angle 90° / Zoom-in x 100