G Series



Max. workpiece size
1000 x 700 x 345 mm
Max. workpiece weight
800 kg
Travel of X/Y axes
650 x 400 mm
Travel of U/V axes
160 x 160 mm
Travel of Z axis
350 / 410 / 500 mm
(Submerged height 310 mm)
Wire diameter
0.15 - 0.3 mm
Number of axes controlled
5 Axis AC servo motor
Maximum taper angle
±30°/ 100mm with wide diamond guide and nozzle
Machine size
2520 x 2720 x 2290 mm
Machine weight
4400 kg
Water tank capacity
850 L


Mechanical Structure-V650G
Smart & Easy
  • Plentiful cutting technologies、Friendly interface、Remote、Conventient feature.
High Speed reliable AWT
  • High speed reliable AWT、 Threading in the slot、Threading under water、 Reduce human resource cost when machining multi modles.
Enhance Machining Performance
  • DPM Module、Discharging Stabilizer、New strategy for corner control、Manual radius size machining、Reduce wire marks from approach cutting、New micron finish circuit.
Power Saving and Low Cost Operation
  • Intelligent power management、Compensation of wire consumption、Easy to maintain and reduce cost for service.

Machine feature

1. Rigid U, V truss design

2. Stainless steel work table with hardness HRC 50°.

3. High response AC servo motor for guaranteed accuracy

4. Extra wide machine base.

To ensure thremal balance, RIB location is designed by finite element analysis (FEA)assuring and optimized rigid structure.

Water cooled lower arm prevents thermal expansion caused by heat buildup. Therefore the accuracy will be improved.

A rugged cast iron machine structure is the foundation of precision.

Intelligent machining mode
Graphical Interface

The HMI panel is easy to operate, using class leading ergonomic technology

Intelligent Machining mode

Workpiece postioning function

Maintenance and Diagnosis information

Technology data search function

Graphical interface

Useful function

DPM-Digital Power Management
DPM - Digital Power Manager

DPM is capable of detecting digital signale signals of sparking density, providing feedback to the CNC system and calculating the sparking size.
It controls the sparking energy, wire tension force and water pressure more precisely; increases cutting speed and accuracy when cutting on irregular thickness workpieces.

Comparison using DPM technology
Mode Speed mode Accuracy mode
Enable 39 Min. ±3µm
Disable 58 Min. ±15µm

(Under factory test conditions)

Stable discharge module

50 holes, one cut, and shape accuracy within 4 micron.

50 holes, one main cut and shape accuracy

SGS vertification workpiece IMG

SCC II Smart Corner Control

Corner eroded reduce 50%

Shape error reduce 40%

SFC-Super Finish Circuit

unit : Ra

High frequency sparking energy provides Ra0.2um surface roughness with 1 rough cut plus 6 sking cuts.
  • Material : Tungsten Carbide
  • Thickness : 30mm
  • Best Surface Roughness Ra 0.14 µm

Entrance Mark Control
Concave section depth within surface roughness, Greatly reduce polishing time.

No control : Entrance mark depth 6µ

EM control : Concave section depth within surface roughness

Smart Radius Control
Type Without control Using control
A 5.001 mm 5.001 mm
B 4.994 mm 4.999 mm
Error 7 µm 2 µm
Auto Wire Threading
Automatic Wire Threading

Continout unmanned operation day night, nonstop machining with ideal break point automatic wire threading.

Automatic Wire Threading
  • Unnecessary to pay attention to wire bread; reduction of the operation cost.
  • The multi-jobs machining would be much easier since the machining will be automatically finished without manual command.
  • G54~59 coordinate can be utilized for automatic work-piece change.
Automatic Wire Threading

Threading at the wire break point. Annealing is used to improve the straightness of the wore. The wire can be threaded at the break point during machining, with virtually 100% reliability and without the need to return to the start hole.

Submeraged Wire Threading : Wire threading is also easy execute during submerged machining, saves time to drain and refill the work tank.

Multi-hole machining function : On the rare occasion events when the machine fails to rethread during multi-hole machining, the system will skip to the next hole. The location of the skipped hole is automatically stored in memory and can be recalled later to complete the machining.

High Speed Auto Wire Threading System
Workpiece Thickness 100mm
  • Wire annealing and cutting : 10 sec
  • Threading : 10 sec
Workpiece Thickness 800mm
  • Threading under the water at break point.

Reliable Auto Wire Threading system

The EXCETEK AWT is very sophisticated design that provides continuous unmanned operation day and night. Unlike other systems it can thread at the point of the wire breakage.

A water jet function enables the machine to thread workpieces up to 500mm.

Cutting Technology
Cutting Technology
Type Without control Using control
A 0 0
B 0 ~ -2 µm -8 ~ -10 µm
C 0 0
D 0 ~ -2 µm -8 ~ -10 µm
Remote Monitor System
Remote Monitor System


Standard Accessories

  • Ion exchange resin x 10L
  • Paper filter x 2 pcs
  • Diamond guide x 2 pcs
  • Upper and lower flushing nozzle x 2 sets
  • Energizing plates x 2 pcs
  • Brass wire x 1 spool
  • Clamping tool x 1 set
  • Vertical alignment jig x 1 set


  • XY axis linear scale
  • W-Axis
  • Clamping Beam
  • Jumbo Feeder L-50A
  • AWT
  • Double Door
  • AVR 15KVA
  • Power Slide Door
    (Only V650G & V850G)
  • Transformer 15KVA
  • Signal Tower
  • Short Message Service (SMS)
  • Remote Monitor System
  • Super Finish Circuit