1. Rigid U, V truss design
2. Stainless steel worktable with hardness HRC 50°.
3. Machine Casting is designed based on the FEA analysis for increasing the rigidity.
4. Machine base with extra wide.
Water cooled lower arm prevents thermal expansion caused by heat buildup. Therefore the accuracy will be improved.
A rugged cast iron machine structure is the foundation of precision.
The HMI panel is easy to operate, using class leading ergonomic technology
Workpiece postioning function
Maintenance and Diagnosis information
Technology data search function
Continout unmanned operation day night, nonstop machining with ideal break point automatic wire threading.
Threading Wire At Break Point:
Annealing function is used to improve the wire straightness while threading. The wire can be threaded at the break point during machining, with virtually 100% reliability and without the need of return to the start hole.
Submerged Wire Threading:
Wire Threading can also be executed easily during submerged machining where it is not necessary to drain water or refill the work tank.
Multi-Hole Machining Function:
In continuous machining function, when the machine fails to rethread at multi-hole machining, the system will skip current hole and continue to next hole. The location of the skipped hole is automatically recorded in the data memory and it recalls the skipped hole later during the completion of the cut.
Threading With Water Jet Function:
In the case of tall work pieces or during the submerged machining, the water jet can be used to enhance the wire threading operation
The EXCETEK AWT is very sophisticated design that provides continuous unmanned operation day and night. Unlike other systems it can thread at the point of the wire breakage.
A water jet function enables the machine to thread workpieces up to 500mm.
|Type||Without control||Using control|
|B||0 ~ -2 µm||-8 ~ -10 µm|
|D||0 ~ -2 µm||-8 ~ -10 µm|